Vineyard Sprayer
Bare Frame.
I decided to build a pull behind sprayer, and one that could be pulled behind basically anything! Here is some pictures and steps in its construction.
PARTS LIST:
Frame constructed out of 1/8"wall 1x1 Square Tube
Cheap $6.99 Wheels from Tractor Supply Store
5/8" Cold Rolled axle
A 26 Gallon spot sprayer unit from Northern tool
Battery Box
1 x1 Angle iron for booms
sprayer nozzles
Hose
Valves for spray selection'
Remote on off switch box
Frame constructed out of 1/8"wall 1x1 Square Tube
Cheap $6.99 Wheels from Tractor Supply Store
5/8" Cold Rolled axle
A 26 Gallon spot sprayer unit from Northern tool
Battery Box
1 x1 Angle iron for booms
sprayer nozzles
Hose
Valves for spray selection'
Remote on off switch box
Frame with axle and wheels (axle still has to be cut down to size)
With spray tank and battery box
Vineyard Sign started 4/14/10 finished 5/11/11
If I go into business or not its always nice to have a sign for a farm, orchard, or in my case a vineyard. The sign is made out of plywood with a pine trim. I will post some more picture as I finish it.
The picture is a little dark but the sign is about 75% completed, the base is painted and the trim has three coats on.
Here is the sign about 99% done. I still need to get the letter S to spell vineyards.
I saw this tool in an old grape growing book and I figured why not....So I searched the internet and found one for under $30.00. This thing is a beast. It has like an axe handle and with one swing I can get down almost 4-5 inches. Works great for working up a narrow potato bed. Also is good for breaking up heavy soils.
